Das bedeutet 8 Datenbits, Keine (No) Parity, 1 Stop-Bit. Diese Einstellung ist in jedem Fall erforderlich und geht wie folgt (siehe auch mein Link, daher hier die Zeilennummern):
Code:
00025 #include <errno.h>
00026 #include <fcntl.h>
00027 #include <math.h>
00028 #include <stdio.h>
00029 #include <stdlib.h>
00030 #include <string.h>
00031 #include <termios.h>
00032 #include <unistd.h>
00033 #include <sys/types.h>
00034 #include <sys/ioctl.h>
00035 #include <sys/stat.h>
00036 #include <sys/time.h>

00045 #include <linux/serial.h>

00050 #define READ_TIMEOUT          250000      /* less than 1e6 */

00037         struct termios  options;


00072         // Get current port settings
00073         tcgetattr(mDev_fd, &options);
00074 
00075         // this setting is needed for Mac OS! But works under Linux, too!
00076         options.c_cflag |= CLOCAL;
00077 
00078         // 8N1
00079         options.c_cflag &= ~PARENB;  // Parity = N
00080         options.c_cflag &= ~CSTOPB;  // 1 Stop Bit
00081         options.c_cflag &= ~CSIZE; // hm, wofür ist das eigentlich?
00082         options.c_cflag |= CS8; // 8 Datenbits

// Da man in der Regel kein Hardware-Flow-Control hat / nutzt, ist es auch wichtig, dieses für den seriellen Port abzuschalten:

00084         // Disable hardware flow control:
00085         options.c_cflag &= ~CRTSCTS;

00167         // Cause the new options to take effect immediately.
00168         tcsetattr(mDev_fd, TCSANOW, &options);