Compiler findet Labels nicht???
Ich habe von den BASCOM Demos ein Beispiel zum DS1307 folgenden Code:
Code:
'-------------------------------------------------------------------------------
' DS1307.BAS
' shows how to use the ds1307 clock on the 2313 futurlec board
' it also shows the CONFIG CLOCK=USER option
'-------------------------------------------------------------------------------
$regfile = "2313def.dat"
$crystal = 8000000
$baud = 19200
$lib "mcsbyte.lbx" ' for smaller code
$lib "ds1307clock.lib" ' modified lib
'configure the scl and sda pins
Config Sda = Portd.6
Config Scl = Portd.5
'address of ds1307
Const Ds1307w = &HD0 ' Addresses of Ds1307 clock
Const Ds1307r = &HD1
Config Clock = User ' this will dim the bytes automatic
'dim other needed variables
Dim Weekday As Byte
Print "DS1307"
Waitms 100
' assigning the time will call the SetTime routine
Time$ = "23:58:59" ' to watch the day changing value
Date$ = "11-13-02" ' 13 november 2002
Do
Print "Date Time : " ; Date$ ; " " ; Time$
Waitms 500
Loop
End
'called from ds1307clock.lib
Getdatetime:
I2cstart ' Generate start code
I2cwbyte Ds1307w ' send address
I2cwbyte 0 ' start address in 1307
I2cstart ' Generate start code
I2cwbyte Ds1307r ' send address
I2crbyte _sec , Ack
I2crbyte _min , Ack ' MINUTES
I2crbyte _hour , Ack ' Hours
I2crbyte Weekday , Ack ' Day of Week
I2crbyte _day , Ack ' Day of Month
I2crbyte _month , Ack ' Month of Year
I2crbyte _year , Nack ' Year
I2cstop
_sec = Makedec(_sec) : _min = Makedec(_min) : _hour = Makedec(_hour)
_day = Makedec(_day) : _month = Makedec(_month) : _year = Makedec(_year)
Return
Setdate:
_day = Makebcd(_day) : _month = Makebcd(_month) : _year = Makebcd(_year)
I2cstart ' Generate start code
I2cwbyte Ds1307w ' send address
I2cwbyte 4 ' starting address in 1307
I2cwbyte _day ' Send Data to SECONDS
I2cwbyte _month ' MINUTES
I2cwbyte _year ' Hours
I2cstop
Return
Settime:
_sec = Makebcd(_sec) : _min = Makebcd(_min) : _hour = Makebcd(_hour)
I2cstart ' Generate start code
I2cwbyte Ds1307w ' send address
I2cwbyte 0 ' starting address in 1307
I2cwbyte _sec ' Send Data to SECONDS
I2cwbyte _min ' MINUTES
I2cwbyte _hour ' Hours
I2cstop
Return
Funktioniert!
Wenn ich den Code nun 1 zu 1 in ein bestehendes Projekt stecke bekomme ich folgende Errors:
Error 61:
Line: 696
Label not Found:
_PRINTLONG
Error 61:
Line: 696
Label not Found:
_PRINTSDECW
Error 61:
Line: 696
Label not Found:
_PRINTLONG
Error 61:
Line: 696
Label not Found:
_PRINTLONG
Line 695 ist die Letzte Zeile in dem Projekt. (kommentar)
Was ist da los?
Mfg
