so ist er dann richtig

Code:
const int Motor_1 = 10; //Motor
const int Motor_2 = 11;
const int Fern_3 = 4; //Fern Vor
const int Fern_1 = 5; //Fern Rück
const int FERNON = 13;
int Start = 12; // start Motor

void setup() {
pinMode(10, OUTPUT);
pinMode(11, OUTPUT);
pinMode(4, INPUT);
pinMode(5, INPUT);
pinMode(12, OUTPUT);//Start
pinMode(13, OUTPUT);
}


void loop()
{
digitalWrite(Start, HIGH);
digitalWrite(FERNON, HIGH);


int Taster = digitalRead(Fern_3);//Fern Vor
while (Taster == 1)//while the button is pressed
{
digitalWrite(10, HIGH);
digitalWrite(11, LOW);
delay(100);
digitalWrite(10, LOW);
digitalWrite(11, LOW);
Taster = digitalRead(Fern_3); //refresh value of variable
}


int Taster_1 = digitalRead(Fern_1);//Fern vor
while (Taster_1 == 1)//while the button is pressed
{
digitalWrite(11, HIGH);
digitalWrite(10, LOW);
delay(100);
digitalWrite(11, LOW);
digitalWrite(10, LOW);
Taster_1 = digitalRead(Fern_1); //refresh value of variable
}
}