Hey Thegon,

du solltest in direkter Nähe zum MCP1407 mindestens ein oder mehrere 100nF-Kondensatoren platzieren. Nur so ist gewährleistet, dass der Treiber die hohen Ströme beim Umschalten schnell leifert und damit der MOSFET nicht abraucht. Aus dem Datenblatt:
3.1 Supply Input (VDD)
VDD is the bias supply input for the MOSFET driver and
has a voltage range of 4.5V to 18V. This input must be
decoupled to ground with local capacitors. The bypass
capacitors provide a localized low-impedance path for
the peak currents that are to be provided to the load.
Grüße