Zitat Zitat von vish
Ja, kannst du.
Allerdings hast du dann eine Beschränkung von 2 Kilobyte, was aber normalerweise ausreicht.
Hallo Vish!

Ich habe mir Bascom einmal in der Demo-Version heruntergeladen, es gehen neuerdings anscheinend auch 4kB Code.

Auszug aus der Lizenzvereinbarung:

Code:
Thank you for trying this DEMO of BASCOM-AVR

This file contains some additional info on BASCOM-AVR.

This demo can compile up to 4096 bytes of code, when you have more code, you
will receive an error.

The commercial version is available for : 79 euro.

Support and updates are free for the commercial version.
It is the intention of MCS Electronics to keep updates free.
In the future, support might be a paid service, while updates remain free. 
But again, the intention is to keep it free.

There is no support for this DEMO other than when you encounter
problems during installation.
There is a forum at www.mcselec.com/forum with members that can help you.

The DEMO may not be used to created commercial devices.


Have fun,

Mark Alberts
MCS Electronics

************************************************************************
***************             IMPORTANT            ***********************
************************************************************************
When you don't see the pictures of the buttons in the IDE you need to install
a newer version of the comctl32.dll.
You can download the file  40comupd.exe from microsoft,or from MCS.
*************************************************************************
When you get an Error 123 you probably don't have a printer installed
Install a printer driver (HP Laserjet 4 for example) and run again.
There does not need to be a printer connected, only as printer created.
*************************************************************************
When you get an OleSysError, reboot Windows and run SETUP again.
After rebooting again, run Bascom again.
*************************************************************************
When you install the software on a NT machine you need administrator rights
during SETUP. You also must run Bascom once as an administrator so that the
ioport.sys driver will be setup. After this you can use the software logged on
as a normal user without administation rights.
*************************************************************************

- If you run into problems send an email to support@mcselec.com
  with the problem and all the generated file of your project(rpt,cfg,bas,bin,etc.)
  Please specify that your version is the DEMO version.

- Check out the sample files which contain info on the syntax.
  The samples are a bit simple and only intended to show the syntax of the commands.

Some samples require a specific chip or more code then the DEMO can create.
You will get errors then at compile time.

While the demo is restricted, it allows you to work with the smaller chips and to try
all functions.
The DEMO is ideal for educational institutes as you only need some cheap hardware.

As we do not earn money on the demo, we do not give support, or limited support.
Customers are helped first, then DEMO users are helped if there is time.
The last restriction on the DEMO is that it does not come with the LIB Assembler code.
The LIB assem code only comes with the full version.

Grüsse Wolfgang