mal ein zwischenstand:

Code:



$regfile = "m8def.dat"
$crystal = 8000000
$hwstack = 70                                               ' default use 32 for the hardware stack
$swstack = 250                                              ' default use 10 for the SW stack
$framesize = 80


$baud = 19200

' Konfiguration zum Kompilieren
Const Max_framelen = 32
Dim Slaveaddress As Byte
' dim slaveaddress as word
Slaveaddress = &B00000011

Dim Tx_data(max_framelen) As Byte
Dim Tx_string As String * Max_framelen At Tx_data Overlay
#if Max_framelen > 255
   Dim Tx_pointer As Word
#else
   Dim Tx_pointer As Byte
#endif

Dim Rx_data(max_framelen) As Byte
Dim Rx_string As String * Max_framelen At Rx_data Overlay
#if Max_framelen > 255
   Dim Rx_pointer As Word
#else
   Dim Rx_pointer As Byte
#endif

Dim Data_array(max_framelen) As Byte
Dim Flag_array(3) As Byte

Dim Rx_flag As Byte
Dim Timerflag As Byte
Dim Frame_receive_flag As Byte

Declare Sub Rx_verarbeitung()

' Interrupts initialisieren
On Urxc Zeichenempfang
Enable Urxc


Config Timer0 = Timer , Prescale = 1024
On Timer0 Timer_irq
Const Timervorgabe = 178

Disable Timer0
Enable Interrupts


' Mainloop
Do
'Hier könnte Ihr Hauptprogramm stehen


   If Timerflag = 1 Then
      Timerflag = 0
      ' verarbeitung
          Print Rx_string
          Call Rx_verarbeitung()
      Rx_pointer = 0
      Rx_flag = 0
   End If
   If Rx_flag = 1 And Rx_data(1) = &B01010100 And Rx_pointer > 3 Then
      Call Rx_verarbeitung()
   End If
Loop



Timer_irq:
   Timer0 = 0
   Timerflag = 1
   Disable Timer0
   Incr Rx_pointer
   Rx_data(rx_pointer) = 0
Return

Zeichenempfang:
   Timer0 = Timervorgabe
   Enable Timer0
   Rx_flag = 1
   If Rx_pointer < 19 Then
      Incr Rx_pointer
      Rx_data(rx_pointer) = Udr
   End If
Return


Sub Rx_verarbeitung()
   Local Hdb2_rx As Byte
   Local Hdb1_rx As Byte

   Local Dd_num As Byte
   Local Ss_num As Byte
   Local Pp_num As Byte
   Local Aa_num As Byte
   Local Eee_num As Byte

   Local Checksum_var As Word
   Local Checksum_byte_1 As Byte
   Local Checksum_byte_2 As Byte
   Local Checksum_check_flag As Byte
   Local Checksum_long As Long

   Local Temp_variable_1 As Word
   Local Temp_variable_2 As Word
   Local Temp_variable_3 As Word
   Local Temp_variable_4 As Word
   Local Nnnn_num As Word

   Local Rx_bytes_to_load As Word
   Local Slaveaddress_check_flag As Byte

   ' für test:
   Rx_pointer = 8
   Rx_data(1) = &B01010100
   Rx_data(2) = &B01010001
   Rx_data(3) = &B01000001
   Rx_data(4) = &B00000011
   Rx_data(5) = &B00000001
   Rx_data(6) = &B11110000
   Rx_data(7) = &B00100010
   Rx_data(8) = &B00110101


   ' hdb2
   Dd_num = Rx_data(2)
   Shift Dd_num , Right , 6

   Ss_num = Rx_data(2)
   Ss_num = Ss_num And &B00110000
   Shift Ss_num , Right , 4

   Pp_num = Rx_data(2)
   Pp_num = Pp_num And &B00001100
   Shift Pp_num , Right , 2

   Aa_num = Rx_data(2)
   Aa_num = Aa_num And &B00000011

   ' hdb1
   Eee_num = Rx_data(3)
   Eee_num = Eee_num And &B01110000
   Shift Eee_num , Right , 4

   Nnnn_num = Rx_data(3)
   Nnnn_num = Nnnn_num And &B00001111

   ' add framelength
   Select Case Nnnn_num
      Case &B00000000
           Rx_bytes_to_load = 0
      Case &B00000001
           Rx_bytes_to_load = 1
      Case &B00000010
           Rx_bytes_to_load = 2
      Case &B00000011
           Rx_bytes_to_load = 3
      Case &B00000100
           Rx_bytes_to_load = 4
      Case &B00000101
           Rx_bytes_to_load = 5
      Case &B00000110
           Rx_bytes_to_load = 6
      Case &B00000111
           Rx_bytes_to_load = 7
      Case &B00001000
           Rx_bytes_to_load = 8
      Case &B00001001
           Rx_bytes_to_load = 16
      #if Max_framelen > 16
      Case &B00001010
           Rx_bytes_to_load = 32
      #endif
      #if Max_framelen > 32
      Case &B00001011
           Rx_bytes_to_load = 64
      #endif
      #if Max_framelen > 64
      Case &B00001100
           Rx_bytes_to_load = 128
      #endif
      #if Max_framelen > 128
      Case &B00001101
           Rx_bytes_to_load = 256
      #endif
      #if Max_framelen > 256
      Case &B00001110
           Rx_bytes_to_load = 512
      #endif
      Case Else
           Rx_bytes_to_load = 0
   End Select

   ' add checksumlength
   Select Case Eee_num
      Case &B00000010
           Rx_bytes_to_load = Rx_bytes_to_load + 1
      Case &B00000011
           Rx_bytes_to_load = Rx_bytes_to_load + 1
      Case &B00000100
           Rx_bytes_to_load = Rx_bytes_to_load + 2
      Case &B00000101
           Rx_bytes_to_load = Rx_bytes_to_load + 4
      Case Else
           ' nix machen
           nop
   End Select

   Rx_bytes_to_load = Rx_bytes_to_load + Ss_num             ' source adress bytes
   Rx_bytes_to_load = Rx_bytes_to_load + Dd_num             ' destination adress bytes
   Rx_bytes_to_load = Rx_bytes_to_load + Pp_num             ' protokoll spec. flag bytes
   Rx_bytes_to_load = Rx_bytes_to_load + 3                  ' Sync, HDB2, HDB1

   ' Auf Adresse prüfen, geht im Moment nur auf 1 und 2 Byte Adresse
   Temp_variable_1 = 3 + Dd_num
   Temp_variable_2 = 3
   Temp_variable_3 = 0
   While Temp_variable_2 < Temp_variable_1
      Incr Temp_variable_2
      Shift Temp_variable_3 , Left , 1
      Temp_variable_3 = Temp_variable_3 + Rx_data(temp_variable_2)
   Wend
   If Temp_variable_3 = Slaveaddress Then
      Slaveaddress_check_flag = 1
   Else
      Slaveaddress_check_flag = 0
   End If


   ' Checksumme prüfen
   Checksum_check_flag = 0
   If Rx_bytes_to_load = Rx_pointer And Slaveaddress_check_flag = 1 Then       ' Frame ist ganz empfangen, Adresse stimmt
      Checksum_var = 0
      Checksum_byte_1 = 0
      Checksum_byte_2 = 0
      Select Case Eee_num
         Case &B00000010                                    ' 8-bit checksum
              Temp_variable_1 = Rx_bytes_to_load - 2
              For Temp_variable_2 = 2 To Temp_variable_1
                  Checksum_var = Checksum_var + Rx_data(temp_variable_2)
              Next
              Checksum_byte_1 = Low(checksum_var)
              If Rx_data(rx_bytes_to_load) = Checksum_byte_1 Then
                  Checksum_check_flag = 1
              Else
                  Checksum_check_flag = 0
              End If
         Case &B00000011                                    ' 8-bit crc
              Temp_variable_1 = Rx_bytes_to_load - 2
              Checksum_byte_1 = Crc8(rx_data(2) , Temp_variable_1)
              If Rx_data(rx_bytes_to_load) = Checksum_byte_1 Then
                  Checksum_check_flag = 1
              Else
                  Checksum_check_flag = 0
              End If
         Case &B00000100                                    ' 16-bit crc
              Temp_variable_1 = Rx_bytes_to_load - 3
              Checksum_var = Crc16(rx_data(2) , Temp_variable_1)
              Checksum_byte_1 = Low(checksum_var)
              Checksum_byte_2 = High(checksum_var)
              Temp_variable_1 = Rx_bytes_to_load - 1
              If Rx_data(rx_bytes_to_load) = Checksum_byte_1 And Rx_data(temp_variable_1) = Checksum_byte_2 Then
                  Checksum_check_flag = 1
              Else
                  Checksum_check_flag = 0
              End If
         Case &B00000101                                    ' 32-bit crc
              Temp_variable_1 = Rx_bytes_to_load - 5
              Checksum_long = Crc32(rx_data(2) , Temp_variable_1)
      End Select
   End If

   ' Frame war komplett, Adresse und Checksumme stimmt
   ' Daten in Datenarray kopieren und Flag setzen
   If Checksum_check_flag = 1 Then                          ' And Aa_num > 0
      Frame_receive_flag = 1                                ' Frame ist komplett und kann in der Mainloop verarbeitet werden


      Temp_variable_1 = 3
      Temp_variable_1 = Temp_variable_1 + Dd_num
      Temp_variable_1 = Temp_variable_1 + Ss_num
      If Pp_num > 0 Then
         Incr Temp_variable_1
         Flag_array(1) = Rx_data(temp_variable_1)
         If Pp_num > 1 Then
            Incr Temp_variable_1
            Flag_array(1) = Rx_data(temp_variable_1)
            If Pp_num > 2 Then
               Incr Temp_variable_1
               Flag_array(1) = Rx_data(temp_variable_1)
            End If
         End If
      End If

      Temp_variable_2 = Temp_variable_1 + Nnnn_num
      Temp_variable_3 = 0
      While Temp_variable_1 < Temp_variable_2
         Incr Temp_variable_1
         Incr Temp_variable_3
         Data_array(temp_variable_3) = Rx_data(temp_variable_1)
      Wend
   End If

   ' Frame gesetzt, acknowledge erzeugen wenn gebraucht
   If Frame_receive_flag = 1 And Aa_num > 0 Then

      Tx_data(1) = &B01010100                               ' Preamble
      Shift Dd_num , Left , 6
      Shift Ss_num , Left , 4
      Shift Pp_num , Left , 2

      If Checksum_check_flag = 1 Then
         Aa_num = &B00000010                                ' Ackn
      Else
         Aa_num = &B00000011                                ' Nack
      End If

      Tx_data(2) = Dd_num
      Tx_data(2) = Tx_data(2) Or Ss_num
      Tx_data(2) = Tx_data(2) Or Pp_num

      Shift Eee_num , Left , 4
      Tx_data(3) = Eee_num
      Tx_data(3) = Tx_data(3) Or Nnnn_num

   End If
End Sub