Zitat Zitat von Amigorodrigo
@jevermeister: Zum Thema "Motoren bleiben stehen" bin ich grad in den FAQs eines anderen Projekts über etwas gestolpert:

"One motor stops suddenly in a flight

It may occur if your ESC is configured in soft mode.
It is preferable to set the ESCs in MEDIUM or HIGH mode.
A simple test to check this problem:
- hold the Multicopter firmly in your hand
- start the motors and put a little throttle (enough to feel the gyro correction)
- shake it to counter the motor reaction
- if one motor stops, the problem is then related to motor-ESC combination and you probably need to adjust the timing"

...zumindest den teil mit den verschiedenen modi würd ich mal nachvollziehen.
Hallo Amigo,

danke für den Hinweis, aber ich benutze dies SS ESC von Hobbyking, angeblich sind das ja chinesische Überraschungseier und man weiss nie was man hat. Ausserdem kann man bei denen nur brake on/off und LIPO oder NIMH Mode einstellen, mehr nicht.

Ich bekomme von einem Kollegen leihweise drei andere ESC und probier die mal aus. Dann bestell ich Dienstag die Plush von Turnigy, die verwenden viele von den Usern in Willa`s Blog.

Gruß
Nils

ps.: Ich lass gerade n Receiver Check laufen und halte mal die Werte im Auge evtl ist daher das Durchgehen der Motoren zu erklären...