Naja,sehr simpel ist das nicht gerade......
Code:
#include "parapin.h"
#define VCC LP_PIN02
#define CS LP_PIN03
#define CLK LP_PIN04
#define D0 LP_PIN10 /* input pin */
...
clear_pin(CS); /* pull Chip Select low, tell it to acquire */
...
set_pin(CLK); /* clock it */
clear_pin(CLK);
Code:
/* runway lights: light up pins 1 through 9 in sequence */
while (1) {
for (i = 1; i <= 9; i++) {
set_pin(LP_PIN[i]);
usleep(200);
clear_pin(LP_PIN[i]);
}
}
Das habe ich gerade aus der Doku rauskopiert, wie simpler willst Du das noch haben ?
Gruß Sebastian
Lesezeichen