Hallo!

Habe ein Problem mit dem Microcontroller ATMEGA 8 auf dem STK-500, ich habe ihn bereits
erfolgreich mit einer Demo-Version von CodeVision so programmiert, dass
er mir jedes Zeichen, das ich mittels UART übertragen will, richtig
überträgt. Allerdings überträgt er mir wenn ich mit dem AVR-Studio
programmiere (GCC-Plugin) nicht die richtigen Zeichen. In einem Terminal
Programm sehe ich nur sowas: "eeueeuueeuueeuueeuueeueeuueeuu" usw.usw.
wenn ich eigentlich lauter "aaaaaaaaaaaaaaaaaaaaaaaaaaaaa" übertragen
will. Wisst ihr, was das Problem dabei sein kann?

der Programmcode ist 1:1 von dem CodeVision Assistenten übernommen und
lautet wie folgt:


#include <avr/io.h>

// Standard Input/Output functions
#include <stdio.h>

// Declare your global variables here

int main(void)
{
// Declare your local variables here

// Input/Output Ports initialization
// Port B initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In
Func0=In
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T
State0=T
PORTB=0x00;
DDRB=0x00;

// Port C initialization
// Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In
// State6=T State5=T State4=T State3=T State2=T State1=T State0=T
PORTC=0x00;
DDRC=0x00;

// Port D initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In
Func0=In
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T
State0=T
PORTD=0x00;
DDRD=0x00;

// Timer/Counter 0 initialization
// Clock source: System Clock
// Clock value: Timer 0 Stopped
TCCR0=0x00;
TCNT0=0x00;

// Timer/Counter 1 initialization
// Clock source: System Clock
// Clock value: Timer 1 Stopped
// Mode: Normal top=FFFFh
// OC1A output: Discon.
// OC1B output: Discon.
// Noise Canceler: Off
// Input Capture on Falling Edge
// Timer 1 Overflow Interrupt: Off
// Input Capture Interrupt: Off
// Compare A Match Interrupt: Off
// Compare B Match Interrupt: Off
TCCR1A=0x00;
TCCR1B=0x00;
TCNT1H=0x00;
TCNT1L=0x00;
ICR1H=0x00;
ICR1L=0x00;
OCR1AH=0x00;
OCR1AL=0x00;
OCR1BH=0x00;
OCR1BL=0x00;

// Timer/Counter 2 initialization
// Clock source: System Clock
// Clock value: Timer 2 Stopped
// Mode: Normal top=FFh
// OC2 output: Disconnected
ASSR=0x00;
TCCR2=0x00;
TCNT2=0x00;
OCR2=0x00;

// External Interrupt(s) initialization
// INT0: Off
// INT1: Off
MCUCR=0x00;

// Timer(s)/Counter(s) Interrupt(s) initialization
TIMSK=0x00;

// USART initialization
// Communication Parameters: 8 Data, 1 Stop, No Parity
// USART Receiver: Off
// USART Transmitter: On
// USART Mode: Asynchronous
// USART Baud Rate: 9600
UCSRA=0x00;
UCSRB=0x08;
UCSRC=0x86;
UBRRH=0x00;
UBRRL=0x17;

// Analog Comparator initialization
// Analog Comparator: Off
// Analog Comparator Input Capture by Timer/Counter 1: Off
ACSR=0x80;
SFIOR=0x00;

while(1) {
while (!(UCSRA & (1<<UDRE))) /* warten bis Senden moeglich
*/
{
}

UDR = 'a'; /* schreibt das Zeichen x auf die
Schnittstelle */
}

/* wird nie erreicht */
return 0;
}

mfg: Wasserzähler....