halt Moment, stimmt, wir sind ja bei Mega8, ich war gerade beim
Mega16. Beim Mega8 kommt der Uhrenquarz an
TOSC1 / TOSC2, die pinidentisch mit XTAL1 und XTAL2 sind,
nur dann halt ohne externe Kapazitäten.

Datenblatt:
For AVR microcontrollers with Timer/Counter Oscillator pins (TOSC1 and TOSC2), the
crystal is connected directly between the pins. By programming the CKOPT Fuse, the
user can enable internal capacitors on XTAL1 and XTAL2, thereby removing the need
for external capacitors. The Oscillator is optimized for use with a 32.768 kHz watch crystal.
Applying an external clock source to TOSC1 is not recommended.
In dem Fall geht halt der Systemtakt nur noch mit RC-Osz bis 8MHz