hier ist mein CODE

Code:
/*************************************************************************
*
* .C
/*************************************************************************
*
* .C
*
*************************************************************************/

/*************************************************************************
* History
*
* Date   Name		Description
*-------------------------------------------------------------------------
* 05656 CHIS		created
*
*************************************************************************/
#include <avr\io.h>		// Wir brauchen Zugriff auf die I/O's des Controllers
#include <avr\signal.h>
#include <avr\interrupt.h>
#include <avr\eeprom.h>	// Und auf das Flash
#include <inttypes.h>

volatile int timer_flag, s;
int i, t1s;

#define FCLOCK   8000000

// Timer 0
// presc. = 1024
// incr. = 7.813kHz bzw. 0.12ms
#define TCNT0_Reload	(256-(FCLOCK/256)/100)

/*************************************************************************
*
* für Quartz 8.000MHz
*
*************************************************************************/
SIGNAL(SIG_OVERFLOW0) {
outb(TCNT0, TCNT0_Reload); // timer neu laden

timer_flag = 1;
}



int main(void) {



	/******* FÜR UART********/

outb(DDRC, 0xff);
outb(DDRD, 0xff);
/*
* MainLoop
* Timer 1 initialisieren
*/
	//outb(TCNT0, TCNT0_Reload);
	outb(TCCR0, 0x03);         //1024= 7.813 KHz
	outb(TIMSK, inb(TIMSK) | BV(TOIE0));    /* enable T0 IRQ */

// BV (1<<TOIE0)

// gloabel IRQ-Bit setzen
	sei();

/*************************************************************************
* MAIN_Loop
*/
	for(;;) {           // ... ever

		while(!timer_flag) { /* warten auf 1s */
  	}
		timer_flag = 0;

		t1s++;
		if(t1s >8000) {
			t1s = 1;

			if(bit_is_clear(PORTC, PINC0)){
				sbi(PORTC, 0);
				s=s+1;
				if(s==1){
					s=0;
					sbi(PORTD, 5);

				}
				cbi(PORTC, 1);
				sbi(PORTC, 2);
				cbi(PORTC, 3);

				cbi(PORTC, 4);
				sbi(PORTC, 5);
				cbi(PORTC, 6);
				sbi(PORTC, 7);

			} else {
				cbi(PORTC, 0);

				sbi(PORTC, 3);
				cbi(PORTC, 2);
				cbi(PORTD, 5);
      		    sbi(PORTC, 1);
				sbi(PORTC, 4);
				cbi(PORTC, 5);
				sbi(PORTC, 6);
				cbi(PORTC, 7);

		}
	}
	} // for(;;)
	return 0;
}


/* eof */