Hallo Verleihnix,

ob R/W verwendet wird oder auf GND gelegt wird, hängt ganz allein von deinem Programm ab. Die Standard Lib Bascom z.B. unterstützt kein R/W.
Die LCD-Lib von P. Fleury hingegen benötigt R/W als Prozessor Port.

Im Hintergrund deines Bildes liegt ja ein myAVR LCD Modul. Wenn dein Programm damit funzt, liegt es wohl an der Verdrahtung. Probier mal das 4x16 Display am myAVR LCD Modul, falls das mit deinem angelötetem Kabel geht. Allerdings mußt du dazu dein Programm anpassen auf die unterschiedlichen Displays.

Gruß m.a.r.v.in