It looks like the Cadsoft website is going through a few changes, after being purchased by Autodesk, and a few libraries have been lost (including mine :( ) so I have included it here as a .zip.
I...
Art: Beiträge; Benutzer: Windt H.J.
It looks like the Cadsoft website is going through a few changes, after being purchased by Autodesk, and a few libraries have been lost (including mine :( ) so I have included it here as a .zip.
I...
I have created and uploaded an EAGLE library for the C-Control I Unit M2.0x.
Now you can create an PCB around the C-Control I Unit M2.0x.
Search for "C-Control" in the link.
...
Here is an updated version of the CMPS10 Example (v1.2) with updated E-I2C routines (v2.1).
This CCBasic example, with the C-Control I Unit M2.0 mounted on the C-Control I Application Board 2.0, will read the CMPS10 16 bit bearing, 8 bit pitch and roll and display the data on the LCD as B =...
I found this strange but interesting video.
Cockroach Controlled Mobile Robot:
http://youtube.com/watch?v=gwZD59Ic9T8&dpos=0
Hello,
There is also an SRF235.
http://www.robot-electronics.co.uk/shop/Ultrasonic_Rangers1999.htm
http://www.robot-electronics.co.uk/htm/srf235tech.htm
Another ultrasonic ranger is the PING)))...
This software, with the C-Control I Unit M2.0 mounted on the C-Control I Application Board 2.0, demonstrates the SP03 Text To Speech Synthesizer.
Communication is via the IIC Bus....
Hello,
@Superhirn / Andun / michiE / hacker / tobimc
Roboternetz is one of, if not THE, best sites I have ever seen and it helps that I can read some of the German language.
I can’t find my...
Hello,
The only way I know of removing any predefined phrases is using the sp03.exe and com port1 or 2.
It can’t be done with I2C.
Greetings,
H.J. Windt
Hello,
Just for fun I added an SP03.
The SP03 is a small text to speech synthesizer with an I2C interface.
Now the bots speaks!
Greetings,
Hello,
Oh, this is the front, ok. #-o
What I meant is a picture of the “rear” and a picture taken of one side of you bot.
Greetings,
Looks good, congratulations!
Could you also post a picture of the front side of your bot?
Greetings,
H.J. Windt
Hello,
This software, with the C-Control I Unit M2.02 mounted on the C-Control I Application Board 2.0, shows the possibilities of the APPLICATION BOARD LCD that are not supported in ccbasic2.0.
...
Hello,
Have a look at this site:
http://www.robotmaker.co.uk/
Greetings,
H.J. Windt
STIQUITO with controller:
http://www.amazon.de/exec/obidos/ASIN/0471488828/qid%3D1144937290/028-9106178-8462939
Hello,
I'm not sure but maybe this will help you -->> http://www.b-kainka.de/pcmessfaq.htm
Greetings,
H.J. Windt
Hello,
Try this link -> http://ccintern.dharlos.de/
Greetings,
H.J. Windt
Hello,
A nice little Terminal program can be downloaded at -> http://www.b-kainka.de/pcmessfaq.htm
Greetings,
H.J. Windt
Hello,
I’m sorry to hear that you C-Control is malfunctioning.
I have created a small test program for you to try.
You will need to use a terminal program because the program will ask you for a...
Hello,
This software will search the Emulated I2C bus for any connected I2C devices and display the address of any found I2C devices on a terminal program(C-Control I v1.1) or LCD(C-Control I v2.0)....
Hello,
If the software finds anything then it will display:
*********************
EI2C Device!
Address = &dxx
*********************
xx is the decimal address
Greetings,
Hello,
I have uploaded my E-I2C DEVICE SEEK software for you to try.
https://www.roboternetz.de/phpBB2/dload.php?action=file&file_id=311
This software will check all the I2C 7 bit addresses for...
:arrowu: this could be the problem :arrowu:
Try changing your program to..
define SDA Port[7]
define SCL Port[8]
Greetings,
H.J. Windt
Hello,
It could be that you are using an SD20 with Revision 2 software.
Writing a “0” as servo position will deactivate (turn off) the servo.
Try writing a “1” instead.
Success!
Greetings,
H.J....
Hello,
These demo's will read the 4 A/D ports of the PCF8591 and display the values on the LCD (PCF8591 for CCIv2.0) or a terminal program (PCF8591 for CCIv1.1)....