Beim SF08 les' ich beide Werte auf einmal, und folgende reihenfolge funktioniert jedenfalls,
is zwar BasCom, aber trotzdem verständlich, denk ichCode:I2cstart I2cwbyte Tad ' write addr If Err = 1 Then I2cstop Else I2cwbyte 2 ' register I2cstop Incr Tad ' --> read addr I2cstart I2cwbyte Tad I2crbyte Msb , Ack I2crbyte Lsb , Nack I2cstop
Lesezeichen