-         

Seite 1 von 3 123 LetzteLetzte
Ergebnis 1 bis 10 von 24

Thema: Problem beim erzeugen von eigenen Hex-Dateien

  1. #1
    Neuer Benutzer Öfters hier
    Registriert seit
    21.09.2008
    Beiträge
    7

    Problem beim erzeugen von eigenen Hex-Dateien

    Anzeige


    Hi also habe ein Problem beim erstellen von eigenen Hex_dateien.Wenn ich make_all anklicke kommt bei mir das hier:
    Code:
    > "C:\Software\RP6Loader\RP6Examples\RP6Examples_20080915\RP6CONTROL_EXAMPLES\eigene\/make_all.bat" 
    
    C:\Software\RP6Loader\RP6Examples\RP6Examples_20080915\RP6CONTROL_EXAMPLES\eigene>set LANG=C 
    
    C:\Software\RP6Loader\RP6Examples\RP6Examples_20080915\RP6CONTROL_EXAMPLES\eigene>make all 
    
    -------- begin --------
    avr-gcc (WinAVR 20080610) 4.3.0
    Copyright (C) 2008 Free Software Foundation, Inc.
    This is free software; see the source for copying conditions.  There is NO
    warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
    
    
    Compiling: testo.c
    avr-gcc -c -mmcu=atmega32 -I. -gdwarf-2   -Os -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -Wall -Wstrict-prototypes -Wa,-adhlns=testo.lst -I../../RP6Lib -I../../RP6Lib/RP6control -I../../RP6Lib/RP6common -std=gnu99 -MD -MP -MF .dep/testo.o.d testo.c -o testo.o
    testo.c:4:29: error: RP6RobotBaseLib.h: No such file or directory
    testo.c: In function 'main':
    testo.c:7: warning: implicit declaration of function 'initRobotBase'
    testo.c:8: warning: implicit declaration of function 'writeString'
    make: *** [testo.o] Error 1
    
    > Process Exit Code: 2
    > Time Taken: 00:01
    Ich habe einen Extraordner gemacht für meine igenen Hex-Dateiender sieht so aus:C:\Software\RP6Loader\RP6Examples\RP6Examples_ 20080915\RP6CONTROL_EXAMPLES\eigenedep,make_all,make_clean,makefile,RP6Control_I2CMas terLibRP6Control_I2CMasterLibtesto(das hier sidn die Dateien,die im den Ordner sind,habe einfach die aus einen Beispielordner kopiert

    Okay und ich meienr make steht das hier:
    Code:
    # Hey Emacs, this is a -*- makefile -*-
    #
    # RP6 MAKEFILE FOR WinAVR
    # Based on WinAVR Sample makefile written by Eric B. Weddington,
    # Jörg Wunsch, et al.
    #
    #
    # YOU NEED TO EDIT SOME SMALL THINGS IN THIS FILE IF YOU WANT TO USE
    # IT FOR YOUR OWN PROJECTS!
    # THESE LINES ARE ALL AT THE TOP OF THIS FILE AND MARKED VERY CLEARLY !
    # BETTER DO NOT EDIT ANYTHING ELSE!
    #
    # To compile everything you can simply type "make all" on a command line in
    # this directory or simply use the supplied batch files!
    # To remove all the temporary files the compiler has generated you can use
    # "make clean"
    # See end of this file and "make" user manual for more details!
    #
    #
    # Note: Everything behind a '#' is interpreted as a comment in this file!
    #
    #
    
    
    
    
    #
    # Target file name (without extension).
    # This is the name of your main C source file! Do NOT append the ".c"!
    # Example: Let's assume your main source file is "RP6Base_MyProgram.c", then
    # you would write: TARGET = RP6Base_MyProgram
    
    TARGET = testo
    
    #
    
    
    
    #
    # Specify relative path to RP6 library files here.
    # This is "../../RP6Lib" or "../RP6Lib" usually.
    
    RP6_LIB_PATH=../../RP6Lib
    RP6_LIB_PATH_OTHERS= $(RP6_LIB_PATH)/RP6control $(RP6_LIB_PATH)/RP6common
    
    #
    
    
    #------------------------------------------------
    # Main Source file is _automatically_ added here:
    SRC = $(TARGET).c
    # DO NOT EDIT THIS!
    
    
    #
    # If there is more than one source file, append them here separated by spaces.
    # Usually you have to add the Library files here! (ONLY add c files "*.c" here,
    # NO header files "*.h"!)
    # Don't forget to add relative paths!
    
    SRC += $(RP6_LIB_PATH)/RP6control/RP6ControlLib.c
    SRC += $(RP6_LIB_PATH)/RP6common/RP6uart.c
    
    
    #
    # -------------------------------
    # This is the File that we added to this example to make it easier to understand:
    SRC += RP6Control_I2CMasterLib.c
    # -------------------------------
    #
    
    
    #SRC += $(RP6_LIB_PATH)/RP6common/RP6I2CslaveTWI.c
    SRC += $(RP6_LIB_PATH)/RP6common/RP6I2CmasterTWI.c
    
    # You can also wrap lines by appending a backslash to the end of the line
    # like this:
    #SRC += xyz.c \
    #abc.c \
    #asdf.c
    #
    #
    
    
    #
    # Optimization level, can be [0, 1, 2, 3, s]. 0 turns off optimization.
    # (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
    
    OPT = s
    
    #
    
    #                                                                             #
    #-----------------------------------------------------------------------------#
    #
    ######-------------------------------------------------------------------######
    ###### DO NOT EDIT ANYTHING BELOW IF YOU DO NOT KNOW WHAT YOU ARE DOING! ######
    ######-------------------------------------------------------------------######
    #
    #-----------------------------------------------------------------------------#
    #                                                                             #
    
    # MCU name - atmega32 for RP6 Base and Processor Expansion
    MCU = atmega32
    
    
    # Output format. (can be srec, ihex, binary)
    FORMAT = ihex
    
    
    # List Assembler source files here.
    #     Make them always end in a capital .S.  Files ending in a lowercase .s
    #     will not be considered source files but generated files (assembler
    #     output from the compiler), and will be deleted upon "make clean"!
    #     Even though the DOS/Win* filesystem matches both .s and .S the same,
    #     it will preserve the spelling of the filenames, and GCC itself does
    #     care about how the name is spelled on its command-line.
    ASRC =
    
    
    # Debugging format.
    #     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
    #     AVR Studio 4.10 requires dwarf-2.
    #     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
    DEBUG = dwarf-2
    
    
    # List any extra directories to look for include files here.
    #     Each directory must be seperated by a space.
    #     Use forward slashes for directory separators.
    #     For a directory that has spaces, enclose it in quotes.
    EXTRAINCDIRS = $(RP6_LIB_PATH) $(RP6_LIB_PATH_OTHERS)
    
    
    # Compiler flag to set the C Standard level.
    #     c89   = "ANSI" C
    #     gnu89 = c89 plus GCC extensions
    #     c99   = ISO C99 standard (not yet fully implemented)
    #     gnu99 = c99 plus GCC extensions
    CSTANDARD = -std=gnu99
    
    # DO NOT USE THIS FOR RP6 PROJECTS!
    #
    # Processor frequency.
    #     This will define a symbol, F_CPU, in all source code files equal to the
    #     processor frequency. You can then use this symbol in your source code to
    #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
    #     automatically to create a 32-bit value in your source code.
    # F_CPU = 8000000
    
    # Place -D or -U options here
    CDEFS =
    # -DF_CPU=$(F_CPU)UL
    
    # Place -I options here
    CINCS =
    
    #---------------- Compiler Options ----------------
    #  -g*:          generate debugging information
    #  -O*:          optimization level
    #  -f...:        tuning, see GCC manual and avr-libc documentation
    #  -Wall...:     warning level
    #  -Wa,...:      tell GCC to pass this to the assembler.
    #    -adhlns...: create assembler listing
    CFLAGS = -g$(DEBUG)
    CFLAGS += $(CDEFS) $(CINCS)
    CFLAGS += -O$(OPT)
    CFLAGS += -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums
    CFLAGS += -Wall -Wstrict-prototypes
    CFLAGS += -Wa,-adhlns=$(<:.c=.lst)
    CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
    CFLAGS += $(CSTANDARD)
    
    
    #---------------- Assembler Options ----------------
    #  -Wa,...:   tell GCC to pass this to the assembler.
    #  -ahlms:    create listing
    #  -gstabs:   have the assembler create line number information; note that
    #             for use in COFF files, additional information about filenames
    #             and function names needs to be present in the assembler source
    #             files -- see avr-libc docs [FIXME: not yet described there]
    #  -listing-cont-lines: Sets the maximum number of continuation lines of hex
    #       dump that will be displayed for a given single line of source input.
    ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs,--listing-cont-lines=100
    
    
    #---------------- Library Options ----------------
    # Minimalistic printf version
    PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
    
    # Floating point printf version (requires MATH_LIB = -lm below)
    PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
    
    # If this is left blank, then it will use the Standard printf version.
    PRINTF_LIB =
    #PRINTF_LIB = $(PRINTF_LIB_MIN)
    #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
    
    
    # Minimalistic scanf version
    SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
    
    # Floating point + %[ scanf version (requires MATH_LIB = -lm below)
    SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
    
    # If this is left blank, then it will use the Standard scanf version.
    SCANF_LIB =
    #SCANF_LIB = $(SCANF_LIB_MIN)
    #SCANF_LIB = $(SCANF_LIB_FLOAT)
    
    
    MATH_LIB = -lm
    
    
    
    #---------------- External Memory Options ----------------
    
    # 64 KB of external RAM, starting after internal RAM (ATmega128!),
    # used for variables (.data/.bss) and heap (malloc()).
    #EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
    
    # 64 KB of external RAM, starting after internal RAM (ATmega128!),
    # only used for heap (malloc()).
    #EXTMEMOPTS = -Wl,--defsym=__heap_start=0x801100,--defsym=__heap_end=0x80ffff
    
    EXTMEMOPTS =
    
    
    
    #---------------- Linker Options ----------------
    #  -Wl,...:     tell GCC to pass this to linker.
    #    -Map:      create map file
    #    --cref:    add cross reference to  map file
    LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
    LDFLAGS += $(EXTMEMOPTS)
    LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
    
    
    
    #---------------- Programming Options (avrdude) ----------------
    
    # Programming hardware: alf AVR910 avrisp Bascom bsd
    # dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
    #
    # Type: avrdude -c ?
    # to get a full listing.
    #
    AVRDUDE_PROGRAMMER = stk500
    
    # com1 = serial port. Use lpt1 to connect to parallel port.
    AVRDUDE_PORT = com1    # Programmer connected to serial device
    
    AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
    #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
    
    
    # Uncomment the following if you want avrdude's erase cycle counter.
    # Note that this counter needs to be initialized first using -Yn,
    # see avrdude manual.
    #AVRDUDE_ERASE_COUNTER = -y
    
    # Uncomment the following if you do /not/ wish a verification to be
    # performed after programming the device.
    #AVRDUDE_NO_VERIFY = -V
    
    # Increase verbosity level.  Please use this when submitting bug
    # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
    # to submit bug reports.
    #AVRDUDE_VERBOSE = -v -v
    
    AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
    AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
    AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
    AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
    
    
    
    #---------------- Debugging Options ----------------
    
    # For simulavr only - target MCU frequency.
    DEBUG_MFREQ = $(F_CPU)
    
    # Set the DEBUG_UI to either gdb or insight.
    # DEBUG_UI = gdb
    DEBUG_UI = insight
    
    # Set the debugging back-end to either avarice, simulavr.
    DEBUG_BACKEND = avarice
    #DEBUG_BACKEND = simulavr
    
    # GDB Init Filename.
    GDBINIT_FILE = __avr_gdbinit
    
    # When using avarice settings for the JTAG
    JTAG_DEV = /dev/com1
    
    # Debugging port used to communicate between GDB / avarice / simulavr.
    DEBUG_PORT = 4242
    
    # Debugging host used to communicate between GDB / avarice / simulavr, normally
    #     just set to localhost unless doing some sort of crazy debugging when
    #     avarice is running on a different computer.
    DEBUG_HOST = localhost
    
    
    
    #=
    
    
    # Define programs and commands.
    SHELL = sh
    CC = avr-gcc
    OBJCOPY = avr-objcopy
    OBJDUMP = avr-objdump
    SIZE = avr-size
    NM = avr-nm
    AVRDUDE = avrdude
    REMOVE = rm -f
    REMOVEDIR = rmdir
    COPY = cp
    WINSHELL = cmd
    
    
    # Define Messages
    # English
    MSG_ERRORS_NONE = Errors: none
    MSG_BEGIN = -------- begin --------
    MSG_END = --------  end  --------
    MSG_SIZE_BEFORE = Size before:
    MSG_SIZE_AFTER = Size after:
    MSG_COFF = Converting to AVR COFF:
    MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
    MSG_FLASH = Creating load file for Flash:
    MSG_EEPROM = Creating load file for EEPROM:
    MSG_EXTENDED_LISTING = Creating Extended Listing:
    MSG_SYMBOL_TABLE = Creating Symbol Table:
    MSG_LINKING = Linking:
    MSG_COMPILING = Compiling:
    MSG_ASSEMBLING = Assembling:
    MSG_CLEANING = Cleaning project:
    
    
    
    
    # Define all object files.
    OBJ = $(SRC:.c=.o) $(ASRC:.S=.o)
    
    # Define all listing files.
    LST = $(SRC:.c=.lst) $(ASRC:.S=.lst)
    
    
    # Compiler flags to generate dependency files.
    GENDEPFLAGS = -MD -MP -MF .dep/$(@F).d
    
    
    # Combine all necessary flags and optional flags.
    # Add target processor to flags.
    ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
    ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
    
    
    
    
    
    # Default target.
    all: begin gccversion sizebefore build sizeafter end
    
    build: elf hex lss sym
    #eep
    # EEPROM File will not be build!
    
    elf: $(TARGET).elf
    hex: $(TARGET).hex
    #eep: $(TARGET).eep
    lss: $(TARGET).lss
    sym: $(TARGET).sym
    
    
    
    # Eye candy.
    # AVR Studio 3.x does not check make's exit code but relies on
    # the following magic strings to be generated by the compile job.
    begin:
    	@echo
    	@echo $(MSG_BEGIN)
    
    end:
    	@echo $(MSG_END)
    	@echo
    
    
    # Display size of file.
    HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
    ELFSIZE = $(SIZE) --format=avr --mcu=$(MCU) $(TARGET).elf
    
    sizebefore:
    	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
    	2>/dev/null; echo; fi
    
    sizeafter:
    	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
    	2>/dev/null; echo; fi
    
    
    
    # Display compiler version information.
    gccversion :
    	@$(CC) --version
    
    
    
    # Program the device.
    program: $(TARGET).hex $(TARGET).eep
    	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
    
    
    # Generate avr-gdb config/init file which does the following:
    #     define the reset signal, load the target file, connect to target, and set
    #     a breakpoint at main().
    gdb-config:
    	@$(REMOVE) $(GDBINIT_FILE)
    	@echo define reset >> $(GDBINIT_FILE)
    	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
    	@echo end >> $(GDBINIT_FILE)
    	@echo file $(TARGET).elf >> $(GDBINIT_FILE)
    	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
    ifeq ($(DEBUG_BACKEND),simulavr)
    	@echo load  >> $(GDBINIT_FILE)
    endif
    	@echo break main >> $(GDBINIT_FILE)
    
    debug: gdb-config $(TARGET).elf
    ifeq ($(DEBUG_BACKEND), avarice)
    	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
    	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
    	$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
    	@$(WINSHELL) /c pause
    else
    	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
    	$(DEBUG_MFREQ) --port $(DEBUG_PORT)
    endif
    	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
    
    
    
    # Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
    COFFCONVERT=$(OBJCOPY) --debugging \
    --change-section-address .data-0x800000 \
    --change-section-address .bss-0x800000 \
    --change-section-address .noinit-0x800000 \
    --change-section-address .eeprom-0x810000
    
    
    coff: $(TARGET).elf
    	@echo
    	@echo $(MSG_COFF) $(TARGET).cof
    	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
    
    
    extcoff: $(TARGET).elf
    	@echo
    	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
    	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
    
    
    
    # Create final output files (.hex, .eep) from ELF output file.
    %.hex: %.elf
    	@echo
    	@echo $(MSG_FLASH) $@
    	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
    
    #%.eep: %.elf
    #	@echo
    #	@echo $(MSG_EEPROM) $@
    #	-$(OBJCOPY) -j .eeprom --set-section-flags .eeprom=alloc,load \
    #	--change-section-lma .eeprom=0 -O $(FORMAT) $< $@ 
    	
    # Create extended listing file from ELF output file.
    %.lss: %.elf
    	@echo
    	@echo $(MSG_EXTENDED_LISTING) $@
    	$(OBJDUMP) -h -S $< > $@
    
    # Create a symbol table from ELF output file.
    %.sym: %.elf
    	@echo
    	@echo $(MSG_SYMBOL_TABLE) $@
    	$(NM) -n $< > $@
    
    
    
    # Link: create ELF output file from object files.
    .SECONDARY : $(TARGET).elf
    .PRECIOUS : $(OBJ)
    %.elf: $(OBJ)
    	@echo
    	@echo $(MSG_LINKING) $@
    	$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
    
    
    # Compile: create object files from C source files.
    %.o : %.c
    	@echo
    	@echo $(MSG_COMPILING) $<
    	$(CC) -c $(ALL_CFLAGS) $< -o $@
    
    
    # Compile: create assembler files from C source files.
    %.s : %.c
    	$(CC) -S $(ALL_CFLAGS) $< -o $@
    
    
    # Assemble: create object files from assembler source files.
    %.o : %.S
    	@echo
    	@echo $(MSG_ASSEMBLING) $<
    	$(CC) -c $(ALL_ASFLAGS) $< -o $@
    
    # Create preprocessed source for use in sending a bug report.
    %.i : %.c
    	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
    
    
    # Target: clean project.
    clean: begin clean_list end
    
    clean_list :
    	@echo
    	@echo $(MSG_CLEANING)
    
    # We want to keep the generated hexfiles:
    #	$(REMOVE) $(TARGET).hex
    
    #	$(REMOVE) $(TARGET).eep
    	$(REMOVE) $(TARGET).cof
    	$(REMOVE) $(TARGET).elf
    	$(REMOVE) $(TARGET).map
    	$(REMOVE) $(TARGET).sym
    	$(REMOVE) $(TARGET).lss
    	$(REMOVE) $(OBJ)
    	$(REMOVE) $(LST)
    	$(REMOVE) $(SRC:.c=.s)
    	$(REMOVE) $(SRC:.c=.d)
    	$(REMOVE) $(SRC:.c=.i)
    	$(REMOVE) .dep/*
    	$(REMOVEDIR) .dep
    
    
    # Include the dependency files.
    include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
    
    
    # Listing of phony targets.
    .PHONY : all begin finish end sizebefore sizeafter gccversion \
    build elf hex lss sym coff extcoff \
    clean clean_list program debug gdb-config
    
    
    ##
    # Based on WinAVR Sample makefile written by Eric B. Weddington,
    # Jörg Wunsch, et al.
    # Released to the Public Domain.
    # Please read the "make" user manual!
    #
    # On command line:
    #
    # make all = Make software.
    #
    # make clean = Clean out built project files.
    #
    # make coff = Convert ELF to AVR COFF.
    #
    # make extcoff = Convert ELF to AVR Extended COFF.
    #
    # make program = Download the hex file to the device, using avrdude.
    #                Please customize the avrdude settings first!
    #
    # make debug = Start either simulavr or avarice as specified for debugging,
    #              with avr-gdb or avr-insight as the front end for debugging.
    #
    # make filename.s = Just compile filename.c into the assembler code only.
    #
    # make filename.i = Create a preprocessed source file for use in submitting
    #                   bug reports to the GCC project.
    #
    # To rebuild project do "make clean" then "make all".
    #
    ##
    Habe nur das Target verändert auf: TARGET = testo
    naja aber wie schon gesagt geht das irgendwie nicht
    Wenn jemand wüsste,was ich immer falsach mache wäre das echt toll^^
    vielen dank schonmal für eure antworten

    Edit von BASTIUniversal: CowZ hat recht mit den Code-Blocks, darum hab ich das mal für dich erledigt. Ins richtige Forum hab ich dich nebenbei auch verschoben.

  2. #2
    Erfahrener Benutzer Roboter Experte
    Registriert seit
    26.05.2005
    Ort
    Kaiserslautern
    Beiträge
    794
    Woah, Junge...

    Es gibt auch Quotations/Code-Blöcke, dann kann man das auch alles leserlich gestalten...

    Guck dir doch einfach den Fehler an...
    "testo.c:4:29: error: RP6RobotBaseLib.h: No such file or directory"

    Er findet vermutlich die Datei nicht (zumindest nicht in dem Verzeichnis, in dem er sucht).

    Gruß, CowZ

  3. #3
    Neuer Benutzer Öfters hier
    Registriert seit
    21.09.2008
    Beiträge
    7

    Okay aber danke für die schnelle antwort

    Aber,das hat mir leider noch ncith viel geholfen ,könntest du mri erklären,was ich jetzt machen soll?

  4. #4
    Erfahrener Benutzer Robotik Visionär Avatar von Hubert.G
    Registriert seit
    14.10.2006
    Ort
    Pasching OÖ
    Beiträge
    6.186
    Hast du die fehlende *lib.h Datei eingebunden.
    Grüsse Hubert
    ____________

    Meine Projekte findet ihr auf schorsch.at

  5. #5
    Neuer Benutzer Öfters hier
    Registriert seit
    21.09.2008
    Beiträge
    7
    Was ist den diese lib.h datei?^^sry ich bin noch ein "noob" in diesen gebiet
    und wo finde ich diese datei
    grüße selproec

  6. #6
    UnIgor
    Gast
    Hi Selproec,

    also zunächst musst Du in deinem Programm alle benötigten Header includieren. Zum Beispiel so:

    #include "RP6RobotBaseLib.h"

    Aber da ich davon ausgehe, dass Du das gemacht hast, wird das Problem woanders liegen. Wahrscheinlich hast Du diese Libraries (das sind Bibilotheksdateien in denen die Deklarationen der verwendeten Funktion stehen) beim Anlegen deines Ordners nicht mit "umziehen" lassen. Das führt dazu, dass der Compiler sie nicht finden kann...
    Du hast nun zwei Möglichkeiten. Entweder Du änderst den relativen Pfad zu diesen lib.h's in diesem Bereich der makefile:

    # Specify relative path to RP6 library files here.
    # This is "../../RP6Lib" or "../RP6Lib" usually.

    RP6_LIB_PATH=../../RP6Lib
    RP6_LIB_PATH_OTHERS= $(RP6_LIB_PATH)/RP6control $(RP6_LIB_PATH)/RP6common

    ... oder du kopierst einfach den Ordner, der diese Dateien enthält an die richtige Position (das dürfte einfacher sein).

    Gruß
    UnIgor

  7. #7
    UnIgor
    Gast
    ...
    habe gerade nochmal nachgeschaut, wo sich die Lib's normalerweise befinden.
    Versuch's mal indem Du den Ordner "RP6Lib"
    Also wenn Deine makefiles direkt unter

    ..\RP6Examples_20080915\RP6CONTROL_EXAMPLES\eigene \

    liegen, dann versuch's mal indem Du den Ordner "RP6Lib" unter

    ..\RP6Examples_20080915\

    ablegst/kopierst.

    Aber ich würde Dir auch empfehlen, für jedes Projekt einen eigenen Ordner anzulegen, da ja für gewöhnlich jede zu kompilierende Datei ihr eigens Makefile verwendet (dann brauchst Du nicht immer ständig die Namen in der Makefile ändern). Also nach dem Prinzip:

    ..\RP6Examples_20080915\RP6CONTROL_EXAMPLES\eigene \Programm1\
    ..\RP6Examples_20080915\RP6CONTROL_EXAMPLES\eigene \Programm2\
    ..\RP6Examples_20080915\RP6CONTROL_EXAMPLES\eigene \Programm3\
    etc.

    Also wenn sich Deine Makefiles in den einzelne Programmordnern befinden, dann gehört der Ordner "RP6Lib" unter

    ..\RP6Examples_20080915\RP6CONTROL_EXAMPLES\

    Versuch's mal.

    Gruß
    UnIgor

  8. #8
    Neuer Benutzer Öfters hier
    Registriert seit
    21.09.2008
    Beiträge
    7

    Hi UnIngor

    Hi UnIngor
    Also ich habe mal ausprobiert was du mir gesagt hast,aber leider hatte es immer noch nicht geklappt.Ich habe die Vermutung ,dass etwas mit der "RP6Lib.h" datei nicht geht,denn diese Datei war schon in den Ordner"\RP6Examples_20080915\ "....Ich hatte dann mal ausprobiert diese datei in den nächsten Unterornder zu kopieren "RP6Examples_20080915\RP6CONTROL_EXAMPLES" aber auch da kein erfolg^^

    Dann habe ich einfach mal die RP6Lib.h datei in den Ordner"RP6Examples_20080915" kopiert und dann konnte ich nicht mehr auch die Beispielprogramme compilern,also zu Hex-Dateien machen....
    Habe die dann wiederhergestellt und geht wieder.

    Vlt liegt es daran,dass ich etwas vergessen habe in diesen Ordner einzufügen,wo mein Programm ist.muss man da noch etwas hinzufügen,weil bei den anderen Beispielprogrammen sind ja auch noch so ein paar Dateien dabei?
    Also ich habe in den Ordner "eigene" in moment diese Dateien:
    Make_all
    Make_clean
    Makefile
    RP6Control_I2CMasterLib
    RP6Control_I2CMasterLib
    testo(mein Programm)

    Grüße Selproec

  9. #9
    Erfahrener Benutzer Robotik Einstein Avatar von Dirk
    Registriert seit
    30.04.2004
    Ort
    NRW
    Beiträge
    3.791
    Hallo Selproec,

    es müßte ohne Anpassungen der Pfade im makefile klappen, wenn du die selbe Verzeichnisstruktur nimmst, wie in den Beispielen:
    \Examples\RP6BASE_EXAMPLES\Example_01_LEDs\(Dateie n)
    \Examples\RP6CONTROL_EXAMPLES\Example_01_LCD\(Date ien)
    \Examples\RP6Lib\...

    ... also z.B. für deine Programme:
    \Examples\MY_RP6BASE_EXAMPLES\MyExample_01_LEDs\(D ateien)
    \Examples\MY_RP6BASE_EXAMPLES\MyExample_02_Test\(D ateien)
    \Examples\MY_RP6CONTROL_EXAMPLES\MyExample_01_LCD\ (Dateien)
    \Examples\MY_RP6CONTROL_EXAMPLES\MyExample_02_Test \(Dateien)

    Gruß Dirk

  10. #10
    UnIgor
    Gast
    @Selproec

    Kopiere* mal den ganzen Ordner "RP6Lib" (nicht nur einen einzelnen Header) an die Position, die ich Dir schon beschrieben habe.

    MfG
    UnIgor

    *nicht verschieben!

Seite 1 von 3 123 LetzteLetzte

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •