-         

Seite 1 von 2 12 LetzteLetzte
Ergebnis 1 bis 10 von 20

Thema: WINAVR "No rule to make target...'

  1. #1
    Erfahrener Benutzer Roboter Genie
    Registriert seit
    01.03.2007
    Ort
    Kornwestheim (kWh)
    Beiträge
    1.118

    WINAVR "No rule to make target...'

    Anzeige

    Bin gerade dabei von Bascom auf Winavr-gcc umzusatteln. Allerdings habe ich schon beim Compilieren Probleme.

    Zuerst will ich mal ein ganz einfaches Programm compilieren lassen (und linken und was so alles dazugehört) und in nen Atmega8 schreiben.

    Code:
    #include <avr/io.h>          
     
    int main (void) 
    {            
     
       DDRC  = 0xff;             
       PORTC = 0x03;             
     
       while(1) 
       {                
        ; 
       }                         
     
    return 0;                 
    }
    Wie man hoffentlich sieht, will ich einfach nur die Anshclüsse PC0 und PC1 auf "high" legen lassen.

    Das Makefile ist im selben Ordner wie das .c-Sourcefile und heißt auch nur "Make", also ohne eine Endung
    Da drin sind auch alle Sachen soweit mittels Mfile[WinAVR] eingestellt (MCU Name, .c-Sourcefile-Dateipfad, "Target = ...", Programmer (stk200, der ausm Wiki halt) und Port dafür (lpt), wobei ich erstmal eh nur das .hex-file haben will, programmieren könnt ich auch mit Ponyprog )


    Und trotzdem bekomm ich dauernd diese Fehlermeldung:
    Code:
    > "make.exe" all
    
    -------- begin --------
    avr-gcc (GCC) 4.1.2 (WinAVR 20070525)
    Copyright (C) 2006 Free Software Foundation, Inc.
    This is free software; see the source for copying conditions.  There is NO
    warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
    
    make.exe: *** No rule to make target `ErstesProgramm.elf', needed by `elf'.  Stop.
    
    > Process Exit Code: 2
    > Time Taken: 00:00
    Was mach ich da eigentlich falsch?


    Das ist übrigens mein Makefile:
    Code:
    # Hey Emacs, this is a -*- makefile -*-
    #----------------------------------------------------------------------------
    # WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
    #
    # Released to the Public Domain
    #
    # Additional material for this makefile was written by:
    # Peter Fleury
    # Tim Henigan
    # Colin O'Flynn
    # Reiner Patommel
    # Markus Pfaff
    # Sander Pool
    # Frederik Rouleau
    # Carlos Lamas
    #
    #----------------------------------------------------------------------------
    # On command line:
    #
    # make all = Make software.
    #
    # make clean = Clean out built project files.
    #
    # make coff = Convert ELF to AVR COFF.
    #
    # make extcoff = Convert ELF to AVR Extended COFF.
    #
    # make program = Download the hex file to the device, using avrdude.
    #                Please customize the avrdude settings below first!
    #
    # make debug = Start either simulavr or avarice as specified for debugging, 
    #              with avr-gdb or avr-insight as the front end for debugging.
    #
    # make filename.s = Just compile filename.c into the assembler code only.
    #
    # make filename.i = Create a preprocessed source file for use in submitting
    #                   bug reports to the GCC project.
    #
    # To rebuild project do "make clean" then "make all".
    #----------------------------------------------------------------------------
    
    
    # MCU name
    MCU = atmega8
    
    
    # Processor frequency.
    #     This will define a symbol, F_CPU, in all source code files equal to the 
    #     processor frequency. You can then use this symbol in your source code to 
    #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
    #     automatically to create a 32-bit value in your source code.
    #     Typical values are:
    #         F_CPU =  1000000
    #         F_CPU =  1843200
    #         F_CPU =  2000000
    #         F_CPU =  3686400
    #         F_CPU =  4000000
    #         F_CPU =  7372800
    #         F_CPU =  8000000
    #         F_CPU = 11059200
    #         F_CPU = 14745600
    #         F_CPU = 16000000
    #         F_CPU = 18432000
    #         F_CPU = 20000000
    F_CPU = 8000000
    
    
    # Output format. (can be srec, ihex, binary)
    FORMAT = ihex
    
    
    # Target file name (without extension).
    TARGET = ErstesProgramm
    
    
    # Object files directory
    #     To put object files in current directory, use a dot (.), do NOT make
    #     this an empty or blank macro!
    OBJDIR = .
    
    
    # List C source files here. (C dependencies are automatically generated.)
    SRC = $(TARGET).c  ../programs/ErstesProgramm/ErstesProgramm.c
    
    
    # List C++ source files here. (C dependencies are automatically generated.)
    CPPSRC = 
    
    
    # List Assembler source files here.
    #     Make them always end in a capital .S.  Files ending in a lowercase .s
    #     will not be considered source files but generated files (assembler
    #     output from the compiler), and will be deleted upon "make clean"!
    #     Even though the DOS/Win* filesystem matches both .s and .S the same,
    #     it will preserve the spelling of the filenames, and GCC itself does
    #     care about how the name is spelled on its command-line.
    ASRC =
    
    
    # Optimization level, can be [0, 1, 2, 3, s]. 
    #     0 = turn off optimization. s = optimize for size.
    #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
    OPT = s
    
    
    # Debugging format.
    #     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
    #     AVR Studio 4.10 requires dwarf-2.
    #     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
    DEBUG = dwarf-2
    
    
    # List any extra directories to look for include files here.
    #     Each directory must be seperated by a space.
    #     Use forward slashes for directory separators.
    #     For a directory that has spaces, enclose it in quotes.
    EXTRAINCDIRS = 
    
    
    # Compiler flag to set the C Standard level.
    #     c89   = "ANSI" C
    #     gnu89 = c89 plus GCC extensions
    #     c99   = ISO C99 standard (not yet fully implemented)
    #     gnu99 = c99 plus GCC extensions
    CSTANDARD = -std=gnu89
    
    
    # Place -D or -U options here for C sources
    CDEFS = -DF_CPU=$(F_CPU)UL
    
    
    # Place -D or -U options here for ASM sources
    ADEFS = -DF_CPU=$(F_CPU)
    
    
    # Place -D or -U options here for C++ sources
    CPPDEFS = -DF_CPU=$(F_CPU)UL
    #CPPDEFS += -D__STDC_LIMIT_MACROS
    #CPPDEFS += -D__STDC_CONSTANT_MACROS
    
    
    
    #---------------- Compiler Options C ----------------
    #  -g*:          generate debugging information
    #  -O*:          optimization level
    #  -f...:        tuning, see GCC manual and avr-libc documentation
    #  -Wall...:     warning level
    #  -Wa,...:      tell GCC to pass this to the assembler.
    #    -adhlns...: create assembler listing
    CFLAGS = -g$(DEBUG)
    CFLAGS += $(CDEFS)
    CFLAGS += -O$(OPT)
    CFLAGS += -funsigned-char
    CFLAGS += -funsigned-bitfields
    CFLAGS += -fpack-struct
    CFLAGS += -fshort-enums
    CFLAGS += -Wall
    CFLAGS += -Wstrict-prototypes
    #CFLAGS += -mshort-calls
    #CFLAGS += -fno-unit-at-a-time
    #CFLAGS += -Wundef
    #CFLAGS += -Wunreachable-code
    #CFLAGS += -Wsign-compare
    CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
    CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
    CFLAGS += $(CSTANDARD)
    
    
    #---------------- Compiler Options C++ ----------------
    #  -g*:          generate debugging information
    #  -O*:          optimization level
    #  -f...:        tuning, see GCC manual and avr-libc documentation
    #  -Wall...:     warning level
    #  -Wa,...:      tell GCC to pass this to the assembler.
    #    -adhlns...: create assembler listing
    CPPFLAGS = -g$(DEBUG)
    CPPFLAGS += $(CPPDEFS)
    CPPFLAGS += -O$(OPT)
    CPPFLAGS += -funsigned-char
    CPPFLAGS += -funsigned-bitfields
    CPPFLAGS += -fpack-struct
    CPPFLAGS += -fshort-enums
    CPPFLAGS += -fno-exceptions
    CPPFLAGS += -Wall
    CFLAGS += -Wundef
    #CPPFLAGS += -mshort-calls
    #CPPFLAGS += -fno-unit-at-a-time
    #CPPFLAGS += -Wstrict-prototypes
    #CPPFLAGS += -Wunreachable-code
    #CPPFLAGS += -Wsign-compare
    CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
    CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
    #CPPFLAGS += $(CSTANDARD)
    
    
    #---------------- Assembler Options ----------------
    #  -Wa,...:   tell GCC to pass this to the assembler.
    #  -adhlns:   create listing
    #  -gstabs:   have the assembler create line number information; note that
    #             for use in COFF files, additional information about filenames
    #             and function names needs to be present in the assembler source
    #             files -- see avr-libc docs [FIXME: not yet described there]
    #  -listing-cont-lines: Sets the maximum number of continuation lines of hex 
    #       dump that will be displayed for a given single line of source input.
    ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
    
    
    #---------------- Library Options ----------------
    # Minimalistic printf version
    PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
    
    # Floating point printf version (requires MATH_LIB = -lm below)
    PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
    
    # If this is left blank, then it will use the Standard printf version.
    PRINTF_LIB = 
    #PRINTF_LIB = $(PRINTF_LIB_MIN)
    #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
    
    
    # Minimalistic scanf version
    SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
    
    # Floating point + %[ scanf version (requires MATH_LIB = -lm below)
    SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
    
    # If this is left blank, then it will use the Standard scanf version.
    SCANF_LIB = 
    #SCANF_LIB = $(SCANF_LIB_MIN)
    #SCANF_LIB = $(SCANF_LIB_FLOAT)
    
    
    MATH_LIB = -lm
    
    
    # List any extra directories to look for libraries here.
    #     Each directory must be seperated by a space.
    #     Use forward slashes for directory separators.
    #     For a directory that has spaces, enclose it in quotes.
    EXTRALIBDIRS = 
    
    
    
    #---------------- External Memory Options ----------------
    
    # 64 KB of external RAM, starting after internal RAM (ATmega128!),
    # used for variables (.data/.bss) and heap (malloc()).
    #EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
    
    # 64 KB of external RAM, starting after internal RAM (ATmega128!),
    # only used for heap (malloc()).
    #EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
    
    EXTMEMOPTS =
    
    
    
    #---------------- Linker Options ----------------
    #  -Wl,...:     tell GCC to pass this to linker.
    #    -Map:      create map file
    #    --cref:    add cross reference to  map file
    LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
    LDFLAGS += $(EXTMEMOPTS)
    LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
    LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
    #LDFLAGS += -T linker_script.x
    
    
    
    #---------------- Programming Options (avrdude) ----------------
    
    # Programming hardware: alf AVR910 avrisp Bascom bsd 
    # dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
    #
    # Type: avrdude -c ?
    # to get a full listing.
    #
    AVRDUDE_PROGRAMMER = stk200
    
    # com1 = serial port. Use lpt1 to connect to parallel port.
    AVRDUDE_PORT = lpt1
    
    AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
    #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
    
    
    # Uncomment the following if you want avrdude's erase cycle counter.
    # Note that this counter needs to be initialized first using -Yn,
    # see avrdude manual.
    #AVRDUDE_ERASE_COUNTER = -y
    
    # Uncomment the following if you do /not/ wish a verification to be
    # performed after programming the device.
    #AVRDUDE_NO_VERIFY = -V
    
    # Increase verbosity level.  Please use this when submitting bug
    # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
    # to submit bug reports.
    #AVRDUDE_VERBOSE = -v -v
    
    AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
    AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
    AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
    AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
    
    
    
    #---------------- Debugging Options ----------------
    
    # For simulavr only - target MCU frequency.
    DEBUG_MFREQ = $(F_CPU)
    
    # Set the DEBUG_UI to either gdb or insight.
    # DEBUG_UI = gdb
    DEBUG_UI = insight
    
    # Set the debugging back-end to either avarice, simulavr.
    DEBUG_BACKEND = avarice
    #DEBUG_BACKEND = simulavr
    
    # GDB Init Filename.
    GDBINIT_FILE = __avr_gdbinit
    
    # When using avarice settings for the JTAG
    JTAG_DEV = /dev/com1
    
    # Debugging port used to communicate between GDB / avarice / simulavr.
    DEBUG_PORT = 4242
    
    # Debugging host used to communicate between GDB / avarice / simulavr, normally
    #     just set to localhost unless doing some sort of crazy debugging when 
    #     avarice is running on a different computer.
    DEBUG_HOST = localhost
    
    
    
    #============================================================================
    
    
    # Define programs and commands.
    SHELL = sh
    CC = avr-gcc
    OBJCOPY = avr-objcopy
    OBJDUMP = avr-objdump
    SIZE = avr-size
    AR = avr-ar rcs
    NM = avr-nm
    AVRDUDE = avrdude
    REMOVE = rm -f
    REMOVEDIR = rm -rf
    COPY = cp
    WINSHELL = cmd
    
    
    # Define Messages
    # English
    MSG_ERRORS_NONE = Errors: none
    MSG_BEGIN = -------- begin --------
    MSG_END = --------  end  --------
    MSG_SIZE_BEFORE = Size before: 
    MSG_SIZE_AFTER = Size after:
    MSG_COFF = Converting to AVR COFF:
    MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
    MSG_FLASH = Creating load file for Flash:
    MSG_EEPROM = Creating load file for EEPROM:
    MSG_EXTENDED_LISTING = Creating Extended Listing:
    MSG_SYMBOL_TABLE = Creating Symbol Table:
    MSG_LINKING = Linking:
    MSG_COMPILING = Compiling C:
    MSG_COMPILING_CPP = Compiling C++:
    MSG_ASSEMBLING = Assembling:
    MSG_CLEANING = Cleaning project:
    MSG_CREATING_LIBRARY = Creating library:
    
    
    
    
    # Define all object files.
    OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) 
    
    # Define all listing files.
    LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) 
    
    
    # Compiler flags to generate dependency files.
    GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
    
    
    # Combine all necessary flags and optional flags.
    # Add target processor to flags.
    ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
    ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
    ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
    
    
    
    
    
    # Default target.
    all: begin gccversion sizebefore build sizeafter end
    
    # Change the build target to build a HEX file or a library.
    build: elf hex eep lss sym
    #build: lib
    
    
    elf: $(TARGET).elf
    hex: $(TARGET).hex
    eep: $(TARGET).eep
    lss: $(TARGET).lss
    sym: $(TARGET).sym
    LIBNAME=lib$(TARGET).a
    lib: $(LIBNAME)
    
    
    
    # Eye candy.
    # AVR Studio 3.x does not check make's exit code but relies on
    # the following magic strings to be generated by the compile job.
    begin:
    	@echo
    	@echo $(MSG_BEGIN)
    
    end:
    	@echo $(MSG_END)
    	@echo
    
    
    # Display size of file.
    HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
    ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf
    
    sizebefore:
    	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
    	2>/dev/null; echo; fi
    
    sizeafter:
    	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
    	2>/dev/null; echo; fi
    
    
    
    # Display compiler version information.
    gccversion : 
    	@$(CC) --version
    
    
    
    # Program the device.  
    program: $(TARGET).hex $(TARGET).eep
    	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
    
    
    # Generate avr-gdb config/init file which does the following:
    #     define the reset signal, load the target file, connect to target, and set 
    #     a breakpoint at main().
    gdb-config: 
    	@$(REMOVE) $(GDBINIT_FILE)
    	@echo define reset >> $(GDBINIT_FILE)
    	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
    	@echo end >> $(GDBINIT_FILE)
    	@echo file $(TARGET).elf >> $(GDBINIT_FILE)
    	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
    ifeq ($(DEBUG_BACKEND),simulavr)
    	@echo load  >> $(GDBINIT_FILE)
    endif
    	@echo break main >> $(GDBINIT_FILE)
    
    debug: gdb-config $(TARGET).elf
    ifeq ($(DEBUG_BACKEND), avarice)
    	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
    	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
    	$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
    	@$(WINSHELL) /c pause
    
    else
    	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
    	$(DEBUG_MFREQ) --port $(DEBUG_PORT)
    endif
    	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
    
    
    
    
    # Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
    COFFCONVERT = $(OBJCOPY) --debugging
    COFFCONVERT += --change-section-address .data-0x800000
    COFFCONVERT += --change-section-address .bss-0x800000
    COFFCONVERT += --change-section-address .noinit-0x800000
    COFFCONVERT += --change-section-address .eeprom-0x810000
    
    
    
    coff: $(TARGET).elf
    	@echo
    	@echo $(MSG_COFF) $(TARGET).cof
    	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
    
    
    extcoff: $(TARGET).elf
    	@echo
    	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
    	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
    
    
    
    # Create final output files (.hex, .eep) from ELF output file.
    %.hex: %.elf
    	@echo
    	@echo $(MSG_FLASH) $@
    	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
    
    %.eep: %.elf
    	@echo
    	@echo $(MSG_EEPROM) $@
    	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
    	--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
    
    # Create extended listing file from ELF output file.
    %.lss: %.elf
    	@echo
    	@echo $(MSG_EXTENDED_LISTING) $@
    	$(OBJDUMP) -h -S $< > $@
    
    # Create a symbol table from ELF output file.
    %.sym: %.elf
    	@echo
    	@echo $(MSG_SYMBOL_TABLE) $@
    	$(NM) -n $< > $@
    
    
    
    # Create library from object files.
    .SECONDARY : $(TARGET).a
    .PRECIOUS : $(OBJ)
    %.a: $(OBJ)
    	@echo
    	@echo $(MSG_CREATING_LIBRARY) $@
    	$(AR) $@ $(OBJ)
    
    
    # Link: create ELF output file from object files.
    .SECONDARY : $(TARGET).elf
    .PRECIOUS : $(OBJ)
    %.elf: $(OBJ)
    	@echo
    	@echo $(MSG_LINKING) $@
    	$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
    
    
    # Compile: create object files from C source files.
    $(OBJDIR)/%.o : %.c
    	@echo
    	@echo $(MSG_COMPILING) $<
    	$(CC) -c $(ALL_CFLAGS) $< -o $@ 
    
    
    # Compile: create object files from C++ source files.
    $(OBJDIR)/%.o : %.cpp
    	@echo
    	@echo $(MSG_COMPILING_CPP) $<
    	$(CC) -c $(ALL_CPPFLAGS) $< -o $@ 
    
    
    # Compile: create assembler files from C source files.
    %.s : %.c
    	$(CC) -S $(ALL_CFLAGS) $< -o $@
    
    
    # Compile: create assembler files from C++ source files.
    %.s : %.cpp
    	$(CC) -S $(ALL_CPPFLAGS) $< -o $@
    
    
    # Assemble: create object files from assembler source files.
    $(OBJDIR)/%.o : %.S
    	@echo
    	@echo $(MSG_ASSEMBLING) $<
    	$(CC) -c $(ALL_ASFLAGS) $< -o $@
    
    
    # Create preprocessed source for use in sending a bug report.
    %.i : %.c
    	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ 
    
    
    # Target: clean project.
    clean: begin clean_list end
    
    clean_list :
    	@echo
    	@echo $(MSG_CLEANING)
    	$(REMOVE) $(TARGET).hex
    	$(REMOVE) $(TARGET).eep
    	$(REMOVE) $(TARGET).cof
    	$(REMOVE) $(TARGET).elf
    	$(REMOVE) $(TARGET).map
    	$(REMOVE) $(TARGET).sym
    	$(REMOVE) $(TARGET).lss
    	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
    	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
    	$(REMOVE) $(SRC:.c=.s)
    	$(REMOVE) $(SRC:.c=.d)
    	$(REMOVE) $(SRC:.c=.i)
    	$(REMOVEDIR) .dep
    
    
    # Create object files directory
    $(shell mkdir $(OBJDIR) 2>/dev/null)
    
    
    # Include the dependency files.
    -include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
    
    
    # Listing of phony targets.
    .PHONY : all begin finish end sizebefore sizeafter gccversion \
    build elf hex eep lss sym coff extcoff \
    clean clean_list program debug gdb-config
    Und ich HABE mir schon die ganzen Tutorials auf avrfreaks.net und woauchimmer durchgelesen. Da wird noch nichtmal auf solche Probleme eingegangen.
    in nem anderen Thread hatte jemand ein ähnliches Problem, aber ich habe schon das gemacht, was er zur (vorläufigen) Problemlösung gemacht hat (Makefile woanderst, er hatte danach eben andere Probleme), bei mir ist da nichts passiert.
    Gruß, AlKi

    Jeder Mensch lebt wie ein Uhrwerk, wie ein Computer programmiert...
    ==> UMPROGRAMMIEREN!

    Kubuntu

  2. #2
    Erfahrener Benutzer Roboter Genie Avatar von robocat
    Registriert seit
    18.07.2006
    Beiträge
    935
    mein makefile heisst "Makefile".
    ausserdem hab ich mal gelesen, dass man den pfad möglichst kurz halten sollte, also besser "D:\code\bla.c" als irgendwas langes mit leerzeichen drin.

    vielleicht klappts damit ja schon, ansonsten guck ich nochmal drüber und schreibe, wenn mir was auffällt.

    gruesse

  3. #3
    Erfahrener Benutzer Robotik Einstein
    Registriert seit
    02.11.2005
    Ort
    Dortmund
    Alter
    24
    Beiträge
    1.641
    öhm... hab ich leider auch keine Ahnung, hatte aber mal das gleiche Problem wäre also auch sehr interessiert an der Lösung damit ich von dem Bascom-Mist wegkomme
    o
    L_
    OL
    This is Schäuble. Copy Schäuble into your signature to help him on his way to Überwachungsstaat!

    http://de.youtube.com/watch?v=qV1cZ6jUeGE

  4. #4
    Erfahrener Benutzer Roboter Experte
    Registriert seit
    25.03.2006
    Ort
    Darmstadt
    Alter
    26
    Beiträge
    522
    # List C source files here. (C dependencies are automatically generated.)
    SRC = $(TARGET).c ../programs/ErstesProgramm/ErstesProgramm.c
    Das könnte auch ein Fehler sein, denn ErstesProgramm.c wird doppelt angegeben. Versucht mal zuerst ein Prog aus den mitgelieferten Beispielen zu compilieren.

    MfG Mark

  5. #5
    Erfahrener Benutzer Roboter Genie
    Registriert seit
    01.03.2007
    Ort
    Kornwestheim (kWh)
    Beiträge
    1.118
    mein makefile heisst "Makefile".
    eeh, ja, höhö, so heißt meins auch. hab mich nur hier verschrieben...

    habs mal mit "Make" versucht, erfolglos.


    @p_mork: das habe ich auch schon versucht, sowohl ohne ".c" als auch ohne den Programmnamen (nur die ordner und dann auf "/" geendet, auch mal mit ".." oder "..." dahinter)
    immer derselbe fehler.
    Gruß, AlKi

    Jeder Mensch lebt wie ein Uhrwerk, wie ein Computer programmiert...
    ==> UMPROGRAMMIEREN!

    Kubuntu

  6. #6
    Erfahrener Benutzer Roboter Genie
    Registriert seit
    01.03.2007
    Ort
    Kornwestheim (kWh)
    Beiträge
    1.118
    ok, ich bin weiter: der Mfile-generator hatte den Dateipfad geschnitten. ich habe jetzt das drin:

    Code:
    # List C source files here. (C dependencies are automatically generated.)
    SRC = $(TARGET).c  C:/Programme/WinAVR-20070525/programs/ErstesProgramm
    aber jetzt bekomm ich das:
    Code:
    > "make.exe" all
    
    -------- begin --------
    avr-gcc (GCC) 4.1.2 (WinAVR 20070525)
    Copyright (C) 2006 Free Software Foundation, Inc.
    This is free software; see the source for copying conditions.  There is NO
    warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
    
    
    Compiling C: ErstesProgramm.c
    avr-gcc -c -mmcu=atmega8 -I. -gdwarf-2 -DF_CPU=8000000UL -Os -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -Wall -Wstrict-prototypes -Wa,-adhlns=./ErstesProgramm.lst  -std=gnu89 -Wundef -MMD -MP -MF .dep/ErstesProgramm.o.d ErstesProgramm.c -o ErstesProgramm.o 
    
    Linking: ErstesProgramm.elf
    avr-gcc -mmcu=atmega8 -I. -gdwarf-2 -DF_CPU=8000000UL -Os -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -Wall -Wstrict-prototypes -Wa,-adhlns=ErstesProgramm.o  -std=gnu89 -Wundef -MMD -MP -MF .dep/ErstesProgramm.elf.d ErstesProgramm.o C:/Programme/WinAVR-20070525/programs/ErstesProgramm --output ErstesProgramm.elf -Wl,-Map=ErstesProgramm.map,--cref     -lm
    c:\programme\winavr-20070525\bin\..\lib\gcc\avr\4.1.2\..\..\..\..\avr\bin\ld.exe: C:/Programme/WinAVR-20070525/programs/ErstesProgramm: No such file: Permission denied
    make.exe: *** [ErstesProgramm.elf] Error 1
    
    > Process Exit Code: 2
    > Time Taken: 00:02
    ich glaub ich muss da doch den Dateinamen nach dem Pfad einfügen
    EDIT: NEIN, dann kommt wieder das von voher
    Gruß, AlKi

    Jeder Mensch lebt wie ein Uhrwerk, wie ein Computer programmiert...
    ==> UMPROGRAMMIEREN!

    Kubuntu

  7. #7
    Erfahrener Benutzer Robotik Einstein
    Registriert seit
    02.11.2005
    Ort
    Dortmund
    Alter
    24
    Beiträge
    1.641
    c:\programme\winavr-20070525\bin\..\lib\gcc\avr\4.1.2\..\..\..\..\avr\ bin\ld.exe: C:/Programme/WinAVR-20070525/programs/ErstesProgramm: No such file: Permission denied
    öhm... da is ein Slash falschrum. Vielleicht liegst dadran. nee - die unten sind alle verkehrt rum :P
    o
    L_
    OL
    This is Schäuble. Copy Schäuble into your signature to help him on his way to Überwachungsstaat!

    http://de.youtube.com/watch?v=qV1cZ6jUeGE

  8. #8
    Erfahrener Benutzer Roboter Genie Avatar von robocat
    Registriert seit
    18.07.2006
    Beiträge
    935
    weiter oben steht ja:
    # Target file name (without extension).
    TARGET = ErstesProgramm

    das heisst, wenn du weiter unten

    # List C source files here. (C dependencies are automatically generated.)
    SRC = $(TARGET).c

    stehen hast, reicht das völlig. das "C:/Programme/WinAVR-20070525/programs/ErstesProgramm" würd ich einfach mal weglassen.

    gruesse

    EDIT: allgemein pfuscht diese mfile.exe bei mir manchmal ziemlich, vor allem, wenn man quelldateien hinzufügt. wenn diese im selben ordner liegen wie das makefile, braucht man da auch keine pfadangaben. habe mir inzwischen angewöhnt, das makefile selber zu editieren.

  9. #9
    Erfahrener Benutzer Roboter Genie
    Registriert seit
    01.03.2007
    Ort
    Kornwestheim (kWh)
    Beiträge
    1.118
    HEUKERA!!!! - Das wars. die slahs waren wohl falschrum, aber ohne Pfadangabe macht es zumindest was. jetzt muss ich nur nachguckn, ob es auch das richtige gemacht hat!!!

    EDIT: jop, .hex-file und co sind da, haben auch nen danach aussehenden Inhalt. jetzt muss nur noch das Programmieren funzen.


    Wenn du mal nach Kornwestheim kommst, hast du n Bier (oder was anderes) bei mir gut!
    Gruß, AlKi

    Jeder Mensch lebt wie ein Uhrwerk, wie ein Computer programmiert...
    ==> UMPROGRAMMIEREN!

    Kubuntu

  10. #10
    Erfahrener Benutzer Roboter Genie
    Registriert seit
    01.03.2007
    Ort
    Kornwestheim (kWh)
    Beiträge
    1.118
    ok, jetzt kommt bei "[WinAVR] Program" das da:
    Code:
    > "make.exe" program
    
    Creating load file for EEPROM: ErstesProgramm.eep
    avr-objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" \
    	--change-section-lma .eeprom=0 --no-change-warnings -O ihex ErstesProgramm.elf ErstesProgramm.eep || exit 0
    c:\Programme\WinAVR-20070525\bin\avr-objcopy.exe: there are no sections to be copied!
    avrdude -p atmega8 -P lpt1 -c stk200    -U flash:w:ErstesProgramm.hex 
    make.exe: *** [program] Error -1073741515
    
    > Process Exit Code: 2
    > Time Taken: 00:01
    Was bedeutet jetzt das "Error -1073741515"?

    Könnte es sein, dass AVRdude ein Programm ist, das ich nicht habe?
    Ich guck nochmal in den anderen Thread von 2004, da wurde glaub beschrieben, wie man da Ponyprog einsetzt

    Mit Bascom kann ich den Controller ansprechen, auslesen, und die fusebits hab ich auch schon geändert (8MHz-Takt intern)
    Gruß, AlKi

    Jeder Mensch lebt wie ein Uhrwerk, wie ein Computer programmiert...
    ==> UMPROGRAMMIEREN!

    Kubuntu

Seite 1 von 2 12 LetzteLetzte

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •