hallo leute,
ich bin der absolute pic noob und versuche gerade den einstieg.

weiss jemand warum der ausgang bzw die led nicht blinkt?




#include <p18f8722.h>
#include "delays.h"

#pragma config WDT = OFF // ON|OFF watchdog timer
#pragma config LVP = OFF // ON|OFF low voltage programming
#pragma config MCLRE = OFF // ON|OFF external reset
#pragma config OSC = INTIO67 // LP|XT|HS|RC|EC|ECIO6|HSPLL|RCIO6|INTIO67|INTIO7


void ConfigOSC(void)
{
OSCCON &= !0x70;
//set bits
OSCCON |= 0x70; // internal oscillator freq 8MHz
//OSCCON |= 0x60; // internal oscillator freq 4MHz
//OSCCON |= 0x50; // internal oscillator freq 2MHz
//OSCCON |= 0x40; // internal oscillator freq 1MHz (default after reset)
//OSCCON |= 0x30; // internal oscillator freq 500kHz
//OSCCON |= 0x20; // internal oscillator freq 250kHz
//OSCCON |= 0x10; // internal oscillator freq 125kHz
//OSCCON |= 0x00; // internal oscillator freq 31kHz
// Set PLL
OSCTUNE |= 0b01000000; // set PLLEN bit (FREQ * 4) (only for 8MHz or 4MHz)
}



void main(void)
{
ConfigOSC;

LATB = 0x00;
TRISB = 0xFE;

while(1)
{
LATB = 1;
Delay10KTCYx(250);
LATB = 0;
Delay10KTCYx(250);
}
}




gruss, marc